Sony MV-65ST - Manual (Page 25)

25
Selecting the speaker
mode
— SPEAKER menu
Selecting the downmix mode
— DOWNMIX
You can select the downmix mode from
“STEREO” or “LT/RT.” The downmix
function is used to create stereo (2-channel)
signals from more than 5 separated digital
signals of a source.
STEREO: Select this when the connected audio
equipment does not support Dolby
Surround (Pro Logic).
LT/RT: Select this when the connected audio
equipment supports Dolby Surround
(Pro Logic).
1
Press (SETUP), then press < or ,
button repeatedly until “SPEAKER” menu
appears on the screen.
2
Press M or m button repeatedly to select
“DOWNMIX.”
3
Press < or , button repeatedly to
select “STEREO” or “LT/RT,” then press
(ENTER).
4
Press (SETUP) to exit the SPEAKER
menu.
Selecting the digital audio
output mode
— AUDIO menu
You can set the mode of the audio signals
output from the OPTICAL OUTPUT
connector. “BITSTREAM” or “LPCM 48K” can
be selected.
1
Press (SETUP), then press < or ,
button repeatedly until “AUDIO” menu
appears on the screen.
2
Press M or m button repeatedly to select
“DIGITAL OUTPUT.”
3
Press < or , button repeatedly to
select “BITSTREAM,” “LPCM 48K,” or
“OFF,” then press (ENTER).
4
Press (SETUP) to exit the AUDIO menu.
Notes
• When “OFF” is selected, no signal is output from
the OPTICAL OUTPUT connector.
• When you connect the player and a digital
recording device such as an MD player through
an optical cable to record the CD contents with
that device, the contents will be recorded as one
continuous track.