Sony MV-65ST - Manual (Page 26)

26
Selecting the color system
for the output video
signal
— VIDEO menu
When you connect the player to a TV to watch
the DVD on TV screen, make this setting
according to the color system of your country.
Note that this setting does not affect the screen
of the player.
AUTO: Changes the color system for the video
signal output from the player
automatically according to the color
system recorded on the DVD.
NTSC: Always outputs the NTSC signal.
PAL: Always outputs the PAL signal.
1
Press (SETUP), then press < or ,
button repeatedly until “VIDEO” menu
appears on the screen.
2
Press M or m repeatedly to select “COLOR
SYSTEM.”
3
Press < or , button repeatedly to
select “AUTO,” “NTSC,” or “PAL,” then
press (ENTER).
4
Press (SETUP) to exit the VIDEO menu.
Monitoring video signals
input from the connected
device
Switch the input channel to monitor video
signals input from the device connected to the
VIDEO INPUT connector of the player.
1
Press (POWER) to turn on the player.
The current input channel (DVD) appears
on the screen for 5 seconds.
2
Press (INPUT) repeatedly to select
“VIDEO.”
Each time you press the button, “DVD” and
“VIDEO” alternate.
Be sure to change the input channel setting
to “DVD” to play the DVD with this player.