Siemens AX75 - Manual (Page 17)

© Sieme
ns
A
G
200
4, C:
\S
iemen
s\
D
TP-S
atz\
Pro
dukte
\A
X75_
Pega
su
s_
1\o
ut
-
left page (16) of AX75_Pegasus, short, 140mm, en, A31008-H2850-A1-1-7619 (18.04.2005, 10:38)
Setup 16
VA
R
Langu
age:
en;
VAR issue da
te:
050
307
Connectivity
§Menu§
¢ m ¢
Connectivity
¢
Select function.
GPRS
b
§Yes§ / §No§ Switch GPRS function on/off.
GPRS info
Display of information on connection
status.
IrDA
Your phone has an infrared interface.
With this interface, you can exchange
data such as pictures, ringtones and
phonebook entries with other appliances
which also have an infrared interface. The
distance between two devices must not
exceed 30 cm. The infrared windows in
both devices must be aligned as accurate-
ly as possible with each other.
Authentication
D
Activate or deactivate encrypted In-
ternet dial-up (CSD connections only).
Data services
§Menu§
¢ m ¢
Connectivity
¢
Select function.
For the MMS, WAP and HTTP applications
at least one connection profile must be
set up and activated.
The default for the phone depends on
each service provider.
If necessary, check with your service pro-
vider for details. If necessary enter CSD
settings and GPRS settings (your service
provider will supply you with information
on this if necessary or
www.siemens.com/
mobilephonescustomercare in the
FAQ section).
Select profile
¢ D ¢
Change setting
¢
§Options§
¢
§Edit§
¢
(Enter data)
¢
§Save§ .
HTTP profile
Select profile with
G
. Enter or modify
settings. If necessary, check with your
service provider for details.
Security
§Menu§
¢ m ¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically if no
key has been pressed for one minute in
standby mode. This prevents the phone
from being used accidentally. However,
you can still be called and you can still
make an emergency call.
Direct call
(Phone-code protected)
Only one phone number can be dialled.
Only
‚
b
(PIN2 protected)
Restrict calls to SIM-protected numbers in
the Phonebook.
Last 10 only
(Phone-code protected)
Restrict calls to the list of "dialled
numbers" (p. 11).
Codes
PIN control , Change PIN , Change PIN2 ,
Change phonecode , (p. 7).
This SIM only
b
(Phone-code protected)
Your phone is prevented from being used
with a different SIM card.
Barrings
b
Network barring restricts the use of your
SIM card.
Phone identity
The phone identity number (IMEI)
is displayed. This information may be use-
ful for customer service.
Alternative input in standby mode:
* 0 6