Specifications, Specifications 34 – Sony CAV-M1000ES User Manual
Page 34
34
US
Other Information
Specifications
CAV-M1000ES Main Unit
Audio (each channel)
Continuous average power output (FTC)
All channels:
30 W per channel min. RMS at 8 ohms,
any two channels driven from 20 Hz
to 20 kHz with no more than 0.09 %
THD.
40 W per channel min. RMS at 4 ohms,
any two channels driven from 20 Hz
to 20 kHz with no more than 0.7 %
THD.
Frequency response:
5 Hz to 70 kHz
±
3dB
Input sensitivity:
160 mV for 1 W output, 650 mV for full
output (30 W) with volume control
set to maximum.
Input impedance:
20 k ohms
Signal-to-noise ratio:
92 dB (A-weighted )
Bass control range:
100 Hz
±
14 dB, 2 dB step
Treble control range:
10 kHz
±
14 dB, 2 dB step
SOURCE 1-8 and ZONE 1-6 AUDIO OUT
Frequency response:
5 Hz to 55 kHz
±
3dB
THD @ 2 V:
0.08 %
Signal-to-noise ratio:
102 dB (A-weighted @ 2 V)
Video
Input/output impedance:
75 ohm
Video insertion loss:
0 dB (50 Hz - 6 MHz)
General
12V trigger:
300 mA max each zone, total 1.2 A max
Power requirements:
120 V 60 Hz
Power consumption:
540 W
Dimensions:
430 ✕ 175 ✕ 433 mm
(16
7
/
8
✕ 6
7
/
8
✕ 17
1
/
16
inches)
(w/h/d)
Mass:
24 kg (52 lbs 15 oz)
RM-TP100 RF Remote Control
Interface system:
Liquid crystal touch panel
Liquid crystal size:
5.2 inches (320 ✕ 240 dots)
Touch panel:
Resistance sensible system
Analog type
Maximum range from the RF Antenna:
7 m (22 feet 11
1
/
2
inches)
(The maximum range differs depending
on the environment where you use
the RF Remote Control.)
Power supply:
Rechargeable (Ni-MH) battery
Maximum external dimensions:
227 ✕ 146 ✕ 45 mm
(9 ✕ 5
3
/
4
✕ 1
7
/
8
inches)
(w/h/d, including projecting parts and
controls)
Mass:
0.8 kg (1 lbs 13 oz)
(Main unit only, including the
rechargeable battery)
Operating temperature:
5°C to 35°C (41°F to 95°F)
Design and specifications are subject to change without notice.