Sony CAV-M1000ES - Manual (Page 41)

41 US
Appendix
Using the IR Remote Control for the Keypad
1 2 3 4
5 6 7 8
9 0 >10
SLEEP DIMMER
ENTER
SELECT
LOCK DISC
PAGE SOURCE
DOWN
GUIDE
TOP MENU/
MENU MUTING
VOLUME
RETURN/EXIT DISPLAY
TV VOL TV CH FOLDER F1
TV/VIDEO F2
UP
TV
Buttons marked in gray are used to control the source
components.
Inserting batteries into the Remote
Control
Insert two R06 (size-AA) batteries into the battery
compartment with the + and – correctly oriented to the
markings. When using the Remote, point it at the IR
sensor on the Keypad.
z
When to replace the batteries
Under normal conditions, the batteries should last for about six
months. When the remote no longer operates the player, replace
both batteries with new ones.
Notes
• Do not leave the Remote Control in an extremely hot or a
humid place.
• Do not drop any foreign object into the Remote Control casing,
particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the IR sensor to direct sunlight or lighting
equipment. Doing so may cause a malfunction.
• If you do not intend to use the Remote Control for an extended
period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Turning the Keypad on or off
Press ?/1 to turn the Keypad on.
To turn the Keypad off, press ?/1 again.
Selecting and controlling the source
1
Press SELECT next to the desired source displayed
in the LCD window.
The selected source is activated.
2 Press any of the following buttons to control the
activated source component.
H
: Operates the selected source component.
X : Pauses playback.
x : Stops playback.
. />: Locates a specific track or preset station.
m /M: Locates a section you want to play within a
track.
Adjusting the volume
Press MASTER VOL +/– to the desired volume level.
Muting the volume
Press MUTING.
To cancel the muting, press MUTING again or VOLUME +.
m /M
x
MUTING
VOLUME
X
H
. />
SELECT
? /1