Sony CAV-M1000ES - Manual (Page 7)

7 US
Getting Started
SOURCE SELECT ZONE
RS232C
PROGRAM ENTER MODE BACK CANCEL
ZONE VOLUME
MUTING
ALL ZONE
CHECK LEARN SETUP
1 2 3 4 5 6
qf qd qs qa q; 9 8 7
1 ?/1 (POWER) switch
Press to turn the power on or off.
2 Learning IR window
Used to input remote codes into the Main Unit
.
3 Display window
Displays various information.
4 Mode indicators
Display the current mode. These indicators turn off in
the NORMAL mode.
5 ZONE +/–
Press to select the zone in the NORMAL mode.
6 SOURCE SELECT +/–
Press to select the source component in the NORMAL
mode.
7 RS232C connector
Used to update the firmware of the Main Unit and to
upload/download setup data from a computer using
an RS232C cross cable.
8 PROGRAM
Press to initiate a firmware update.
9 Cursor/ENTER
Press to select a menu.
0 MODE
Press repeatedly to select the mode.
qa BACK
Press to return to the previous layer of the menu.
qs CANCEL
Press to cancel the present operation and return to the
NORMAL mode.
qd ZONE VOLUME +/–
Press to adjust the volume of the selected zone.
qf ALL ZONE MUTING
Press to set muting on or off in all zones.
Front panel of the Main Unit
Parts and Controls