Salton, Inc BL-1051 - Manual (Page 4)

6. Wipe the Blender Base with a damp cloth.
DO NOT IMMERSE THE BLENDER BASE IN WATER OR ANY OTHER
LIQUID.
DO NOT use harsh detergents or abrasive cleaners on any part of
the appliance.
Speed Settings
Low – for mixing and light blending including drinks, sauces, scrambled eggs
and berries
High – for heavier mixing such as whole fruit, soups, mayonnaise and solid
ingredients
Pulse/Ice Crush – for quick bursts of power and to crush ice
HOW TO USE
1. Place the Blender Jar securely on the Blender Base making sure that the handle
of the Blender Jar is aligned with the right edge of the Blender Base.
2. Plug into a 120V AC wall outlet.
3. Add ingredients and replace the Lid by aligning the arrow on the Lid with
the arrow indicated above the handle of the Blender Jar. IMPORTANT: If
the Lid is not installed properly, the Safety Lock Pin will not fit into the
Safety Lock Pin Slot.
4. Raise the Safety Locking Handle over the Lid and secure the Safety Lock Pin
into Safety Lock Pin Slot. The Safety Locking Handle will ‘click’ into place and
the red ‘Power’ light will illuminate indicating the blender is now ready for use.
NOTE: If the Safety Locking Handle has not been secured in place properly and
the red ‘Power’ light does not illuminate, the blender will not operate.
5. Press the desired blending speed.
6. When the ingredients have been blended, press the ‘OFF’ button. Unplug from
the wall outlet and push the Safety Lock/Release button to lower the Safety
Locking Handle.
7. Remove the Blender Jar by lifting up - do not twist. NOTE: Wait until the
Cutting Blades have stopped before removing the Blending Jar.
4
SAL7-585 Booklet Blender Salton BL-1051 _EN VF.qxd 03/08/07 17:19 Page 4