Siemens Gigaset SL565 - Manual (Page 52)

51
Handset settings
Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 11.7.07
Using Bluetooth devices
Your Gigaset SL56 handset can communi-
cate wirelessly via Bluetooth™ with other
devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set. You can register 1 Bluetooth headset
to the handset.
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Activating Bluetooth mode
w
¢
ý
¢
Bluetooth
¢
Activation
In idle status, the ò symbol on the hand-
set shows that Bluetooth mode is acti-
vated:
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
w
¢
ý
¢
Bluetooth
¢
Search
Headset / Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
§Options Press the display key.
Trust Device
Select and press §OK§ .
~ Enter the PIN for the Bluetooth
device you want to register
and press §OK§ .
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
Cancel Press the display key.
Repeat search if necessary:
§Options Select and press §OK§ .
Repeat Search
Select and press §OK§ .
Editing the list of known (trusted)
devices
Open list
w
¢
ý
¢
Bluetooth
¢
Known Devices
A corresponding symbol appears next to
each device name in the list displayed:
Viewing entries
Open list
¢
s (select entry)
§Options Press the display key.
View Entry Select and press §OK§ .
Device name and address are
displayed.
Back with §OK§ .
Changing the name of a Bluetooth device
Open list
¢
s (select entry)
§Options Press the display key.
Rename Select and press §OK§ .
~ Change name.
Save Press the display key
a Back: Press and hold key.
Please note:
If the handset is in Bluetooth mode, any con-
nection via the data cable (page 61) that is
already connected will be interrupted. Blue-
tooth must be deactivated in order for you to
be able to use a connected data cable.
Please note:
If you register a headset, any headset that
is already registered will be overwritten.
Р т V
INT 1
Icon Meaning
ô Bluetooth headset
õ Bluetooth data device