Changing the system pin, Activating/deactivating the hold music, Repeater support – Siemens Gigaset SL565 User Manual

Page 54: Restoring default settings to base station, T (see, D (see

Advertising
background image

53

Base station settings

Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 11.7.07

Changing the system PIN

You can change the 4-digit system PIN set

on the base station (default setting: 0000)

to a 4-digit PIN known only to yourself.

Setting a system PIN facilitates remote

operation of the answering machine

(page 37).
w

¢

Ð

¢

Base

¢

System PIN

~

Enter current System PIN and

press

§OK§

.

~

Enter new system PIN. For

security the PIN is shown as

four stars (****).

s ~ Scroll to the next line, re-enter

new system PIN and press

§OK§

.

a Press

and

hold (idle status).

Activating/deactivating the
hold music

w

¢

Ð

¢

Base

¢

Music on hold

Press

§OK§

to activate or deactivate the wait

melody (

= on).

Repeater support

With a repeater you can increase the range

and reception strength of your base sta-

tion. First you must activate the repeater

mode. This will terminate any calls cur-

rently running through the base station.
Precondition: A repeater is registered.

Eco mode is disabled.
w

¢

Ð

¢

Base

¢

Add. Features

¢

Repeater Mode

§Yes§

Press the display key.

When repeater mode is active, the menu

item is marked with .

Restoring default settings to
base station

When the settings are restored

u

handsets are still registered,

u

the system PIN is not reset,

u

the SMS information services are not

reset.

v

¢

Ð

¢

Base

¢

Base Reset

~

Enter the system PIN and

press

§OK§

.

§Yes§

Press the display key.

Cancel the restoring process by pressing

a or the display key

§No§

.

If you have forgotten the system PIN, you

can reset the base station without it.

In addition, all handsets are de-registered

and the System PIN is reset to 0000:

¤

Disconnect the base station from the

power supply.

¤

Press and hold the registration/paging

key on the base station.

¤

Connect the base station to the power

supply.

¤

Continue to press and hold the registra-

tion/paging key on the base station.

¤

Release the key.

The base station is reset to its default set-

tings.

Please note:

Memorise the new system PIN well! If you for-

get it, the phone will require specialist atten-

tion (page 53).

Please note:

Repeater support and eco mode (see page 16)

cancel each other out, i.e. both functions can-

not be used at the same time.

Advertising