Samsung SCH-u420 - Manual (Page 152)

Sect
ion 12
152
Note: You can also set your phone to start VoiceSignal when you open the
phone. See “Voice Launch” on page 157 for more information.
VoiceSignal includes the following commands:
• Call — Lets you dial the phone by saying any name stored in
your contact list, without ever having to record, or “train” that
name. VoiceSignal automatically voice-activates all your
contacts, even if you have hundreds of them stored on your
phone. You can also dial any telephone number, even if it is not
stored in your contact list, by saying the digits in the number.
(See “Making a Call — Voice Dialing” on page 42 for more
information.)
• Send Text — Lets you launch the Create Text Msg screen.
(See “Creating and Sending a Text Message” on page 98 for
more information.)
• Send Picture — Lets you launch the Create Pic Msg screen.
(See “Creating and Sending a Picture Message” on page 100
for more information.)
• Lookup — Lets you look up and display contact information for
any name stored in your Contacts list by saying the name. (See
“Finding a Contacts Entry” on page 84 for more information.)
• Go to — Lets you access the Voice Memo, Calendar, and
Contacts List features of your phone. (See “Voice Memo” on
page 62, “Calendar” on page 161, and “Your Contacts List” on
page 80 for more information.)
• Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report),
network coverage, signal strength, battery, and phone number.
Note: Speaking clearly, say the command that you want to use. If, after a
few seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and cancels
voice recognition.