Samsung SCH-u420 User Manual
Page 156
Sect
ion 12
156
3. Wait for the beep and say the digits using your normal
tone of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
ⅷ
If the recording was good, say “Yes.”
ⅷ
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
5. After six sets of digits, the phone asks whether you want
to do more adaptation. Answer “Yes.”
6. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are
returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the
following:
1. In standby mode, press the Menu (left) soft key (
),
then press
(for Tools), and
(for Voice Service),
(for Voice Settings), and
for Digit Dialing.
The following options appear in the display:
ⅷ
Adapt Digits
ⅷ
Reset Digits
2. Use the navigation keys to highlight Reset Digits, then
press the
key. The phone prompts you to confirm
digit rest.
7
pqrs
pqrs
1
@
)
)
2
abc
3
def
OK
OK