Data settings, Dtmf tones, Data off — no incoming data calls accepted – Samsung SCH-u420 User Manual
Page 188: Normal — select for a normal tone, Long — select for an extended tone
188
Section 13
2. Use the Up and Down navigation keys to highlight the
Voice Privacy option of your choice, then press
. Your
settings are saved.
Data Settings
Use the Data Settings menu to configure data connection
settings.
1. In standby mode, press the Menu (left) soft key (
),
then press
(for Settings),
(for
Call Settings),
and
for
Data Settings.
2. The following options appear in the display:
ⅷ
Data Off — No incoming data calls accepted.
ⅷ
Data for Next Call — Wait for data call for the next 10
minutes.
ⅷ
Data until Powered Off — Data calls only, no voice calls
accepted, until you power the phone off and on again.
3. Use the Up and Down navigation keys to highlight the
data setting of your choice, then press
. Your setting
is saved.
DTMF Tones
Use this menu to set DTMF settings to Normal, or Long.
1. In standby mode, press the Menu (left) soft key (
),
then press
(for Settings),
(for
Call Settings),
and
for
DTMF Tones. The following options appear
in the display:
ⅷ
Normal — Select for a normal tone
ⅷ
Long — Select for an extended tone
2. Use the Up and Down navigation keys to highlight the
DTMF Tones setting of your choice, then press
. Your
setting is saved.
OK
OK
tuv
tuv
8
4
ghi
ghi
7
pqrs
pqrs
OK
OK
tuv
tuv
8
4
ghi
ghi
tuv
tuv
8
OK
OK