Pause dialing from a contacts entry, Answering a call – Samsung SCH-u420 User Manual
Page 44
44
Sect
ion 3
3. Speak clearly and say the telephone number of the
person you want to call. For example, say “7 8 1 9 7 0 5
2 0 0."
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers
and prompts you with “Did you say?” followed by the
first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the
next one, or use the keypad to select the correct number
from the list. (See “Choice Lists” on page 153, for more
information.)
ⅷ
Press the Repeat (right) soft key (
) to say the name again.
ⅷ
Press the Settings (left) soft key (
) and press the Cancel
right soft key (
) to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) T pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) P pause(s), wait
for the appropriate prompt(s) from the number you are calling
(credit card number, bank account number, and so on) and
enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone
provides eight ring volume settings including: Ringer Off,
Vibrate
,
Low, Low/Medium, Medium, Medium/High, High
, or
Vibrate/High, and/or
different ring types to distinguish callers.)