Samsung CLP-650 Series - Manual (Page 111)

Using Your Printer with a Macintosh
32
8
Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
• Printing
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Verify the following before you install the printer software:
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the Samsung_CLBP on your Macintosh
desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the Samsung_CLBP Installer OSX icon.
7
Click Continue.
8
Click Install.
9
After the installation is finished, click Quit.
Item Requirements
Operating system Mac OS 8.6 ~ 9.2/10.1 or higher
RAM
Mac OS 8.6~9.2 64 MB
Mac OS 10.1 or higher 128 MB
Free disk space 200 MB
Connection USB interface, Network interface