Samsung CLP-650 Series - Manual (Page 27)

Using the Control Panel
3.6
Printer Menu
This menu allows you to reset the printer settings or cancel the
current job.
Setup Menu
Use the Setup menu to configure a variety of printer features.
(*: the default setting)
Item Explanation
Default Set
This menu item allows you to restore the printer’s
factory default settings.
Current Job
You can cancel the current print job and remove it
from the printer buffer.
Item Explanation
LCD Language
The LCD Language setting determines the
language of the text that appears on the control
panel display and information printing.
Emulation The printer language defines how the computer
communicates with the printer.
If you select Auto, your printer can change the
printer language automatically.
Power Save
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save.
Options: English, Czech, Danish,Dutch, Finnish,
French, German, Hungarian, Italian, Norwegian,
Polish, Portuguese, Russian, Spanish, Swedish,
Turkish
Values: Auto, PCL, HEXDUMP, PS3
Options: 5 Minutes, 10 Minutes, 15 Minutes,
30 Minutes, 45 Minutes, 60 Minutes, 120 Minutes
Auto Continue
This item determines whether or not the printer
continues printing when it detects paper not
matched to your paper setting.
• Off: If a paper mismatch occurs, the message
remains on the display and the printer remains
off-line until you insert the correct paper.
• On: If the paper is mismatched, an error
message displays. The printer goes off-line for
30 seconds then automatically clears the
message and continues printing.
Jam Recovery
This item determines how the printer behaves
when a paper jam occurs.
• Off: The printer does not reprint pages.
Printing performance might be increased with
this setting.
• On: The printer automatically reprints pages
after you clear the paper jam.
Altitude Adj.
You can optimize the print quality according to
your altitude.
Auto CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Job Time Out
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the
page.
When a print time-out occurs, the printer
prints the page in the print buffer.
Item Explanation
Options: Off, On
Options: Off, On
Options: Plain, High, Higher, Highest
Values: LF, LF+CR
LF LF+CR
AA
BB
CC
AA
BB
CC
Values: 0 ~ 1800 sec