Samsung CLP-650 Series - Manual (Page 20)

Setting Up Your Printer
2.9
Changing the Display Language
To change the language that is displayed on the control panel,
take the following steps:
1
In ready mode, press the Menu button ( ) on the
control panel until you see “Setup” on the bottom line of
the display.
2
Press the Enter button ( ) to access the menu.
3
Press the Enter button ( ) when “LCD Language”
displays on the bottom line of the display.
4
Press the scroll button ( or ) until the language you
want to use displays.
5
Press the Enter button ( ) to save the selection.
6
Press the On Line/Continue button ( ) to return to
ready mode.
Installing the Printer Software
You must install software using the supplied Printer
software CD after you have set up your printer and
connected it to your computer. For details, see the
Software Section.
The Printer software CD provides you with the following
software:
Programs for Windows
You can install the following printer software using the Printer
software CD.
• Printer driver for Windows. Use this driver to take full
advantage of your printer’s features. See the Software
Section
for details about installing the Samsung printer
driver.
• PostScript Printer Description (PPD) file for Windows to
allow installation of the PostScript driver. See the Software
Section for detail about installing the PostScript driver.
• SmartPanel. Appears when printing errors occur. See the
Software Section for details about installing the
SmartPanel program.
Macintosh Printer Driver
You can print from a Macintosh with your printer. Go to the
Software Section for information about installing the print
software and printing from a Macintosh.
Linux Driver
You can print from a Linux-based computer with your printer.
Go to the Software Section for information about installing
the Linux driver and printing from a Linux environment.
System Requirements
Before you begin, ensure that your system meets the minimum
requirements. Your printer supports the following operating
system.
• Windows 98SE/Me/NT 4.0/2000/XP/2003 - The following
table shows Windows requirements.
N OTES : For Windows NT 4.0/2000/XP/2003, the system
administrator should install the software.
• Macintosh OS 8.6 ~ 9.2/10.1 ~ 10.4. - For details, see the
Software Section.
• Various Linux OS - For details, see the Software Section.
Item Requirements
Operating system Windows 98SE/Me/NT 4.0/2000/XP/
2003
RAM 98SE/Me 32 MB
NT 4.0/2000 64 MB
XP 128 MB
2003 256 MB
Free Disk Space 98SE/Me/NT 4.0/
2000/XP/2003 300 MB
Internet Explorer 5.0 or higher