Star Tech Development BR4100DC User Manual
Page 18
16
PPTP
If your ISP uses the Point-to-Point Tunneling Protocol (PPTP) to connect to the Internet,
you will be required to fill in the information below.
When you are satisfied with your IP address settings, click the OK button.
Congratulations!
You have completed the basic router configuration required for a PPTP
connection. You will be taken to the router’s Status page. You can click Logout to begin
accessing the Internet.
Parameter
Description
IP Address
Enter your IP address.
Subnet Mask
Enter the subnet mask.
Default Gateway
Enter the IP address of the ISP Gateway.
User ID
Enter your User ID (also known as a connection ID).
Password
Enter your password.
PPTP Gateway
If your LAN has a PPTP gateway, enter the gateway
IP address here.
Idle Time Out
As an option, you can specify the idle time
threshold (in minutes) for your WAN port. If the
time period expires with no Internet activity, the
router will automatically disconnect you from your
ISP. Setting this value to “0” means that the router
will never time out.