Star Tech Development BR4100DC - Manual (Page 25)

23
Bridge
From this screen you can set your broadband router to bridge mode and assign an IP
address for management purposes. When bridge mode is selected, the router essentially
connects and enables packet forwarding between homogenous networks. When the
router is in bridge mode, the original WAN MAC address is ignored and the original
LAN MAC address will be used as the MAC address. These values will be restored when
you set the device to any mode other than bridge mode.
When you are satisfied with your bridge mode settings, click Apply.
Parameter Description
IP Address Enter the IP address.
Subnet Mask Enter the subnet mask for bridge mode.