Smeg LS19-7 - Manual (Page 16)

User instructions
15
"3/1" OPTION BUTTON (available in all programs except the soak
program)
By pressing the button (6) you activate the "3/1" option, confirmed when
the relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.
Note: When selecting the "3/1" button, it is normal that the salt and
rinse-aid lights remain on, if their containers are empty.
If the water hardness has been set on a value above H3, and the 3/1
option is activated, the INFORMATION DISPLAY (8) flashes, warning
of a setting error, because these products are not suitable for use with
very hard water. This does not prevent the use of the option, but the
washing results might not be of the best.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
•
Always try to run the dishwasher fully loaded.
•
Do not wash the dishes in running water.
•
Use the washing program that is most appropriate for each type of
load.
•
Do not carry out any preliminary rinsing.
•
If available, connect the dishwasher to a hot water supply up to
60°C.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:
•
separate the more delicate items from dishes that are more
resistant to aggressive detergents and high temperatures;
•
do not pour the detergent directly on the dishes.