Samsung CS29K10MQ - Manual (Page 24)

24
The “I-II” button displays/controls the processing and output
of the audio signal. When power is switched ON, the mode is
automatically preset to either “Dual-I” or “STEREO”,
depending on the current transmission.
Selecting the Sound Mode (depending on the model)
â
u If the receiving conditions deteriorate, listening will be
easier if the mode is set to the “MONO” position using
the “I-II” button.
u If the stereo signal is weak (or if intermittent Stereo-
Mono) and automatic switching occurs, then switch to
the “MONO” mode.
u When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound comes
out only from the left speaker, then press the “I-II” button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
MONO (Normal use)
MONO Ц Ц MONO
NICAM (Normal)
STEREO Ц Ц MONO
NICAM (Normal)
MONO (Normal use)
Dual-I Ц Ц Dual-II
STEREO Ц Ц MONO
(Forced Mono)
Dual-I Э Э Dual-II Э Э MONO
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
ЭЭ ЭЭ
KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 24