Plug & play feature – Samsung CS29K10MQ User Manual
Page 9
9
Plug & Play Feature
When the television is initially powered ON, three basic
customer settings proceed automatically and subsequently:
setting the language, channel and clock.
1
If the television is in Standby mode (red light visible on the
television front panel), press the POWER
button on the remote
control.
Result:
The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is
automatically displayed.
2
Press the s or t button to select required language. Press the
MENU
button to enter the language, and then the message “Ant.
Input Check” is displayed.
â
If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the
+
or
–
button.
Result:
The “Auto store” menu is displayed.
4
Select your country by pressing the
+
or
–
button. To search the
channels, select the “Search” by pressing the s or t button, and
then press the
+
or
–
button (refer to “Storing the Channels
Automatically” on page 11). Press the MENU button to skip.
Result:
The “Time” menu is displayed.
5
Press the
+
or
–
button to move to the hour or minute. Set the hour
or minute by pressing the s or t button (refer to “Setting and
Displaying the Current Time” on page 27).
6
When you have finished, press the MENU button.
Result:
The message “Enjoy your watching” is displayed, and
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the MENU button.
2
Press the s or t button to select the “Function”, and then
press the
+
or
–
button.
3
Select the “Plug & Play” by pressing the s or t button, and
then press the
+
or
–
button.
Result:
The message “Plug & Play” is displayed.
ENG
KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 9