SMC Networks Invivo HNC-63-INT - Manual (Page 4)

4
Rev 05
HNC Neurovascular Array Coil
Your HNC-63-INT Neurovascular Array Coil package consists of the following parts. Please inspect the package
upon receipt to make sure all parts are present and in good order. Use this guide to refer to part names thoughout
this manual.
The HNC-63-INT consists of two housings to facilitate lifting and positioning the coil on the patient cradle
and patient imaging. A latch is located on each side of the housing to secure the housings together and
ensure proper electrical connections between anterior and posterior housings. With latches in the open
position, the anterior housing may be lifted from the posterior housing.
Extreme care should be taken if attempting to move the HNC in one operation. When lifting the anterior housing
from the posterior housing, always grasp the coil by the apron and superior end. IMPORTANT: Never lift the
coil by the rungs in the patient viewing window or by the viewing mirror.
Anterior Coil
Housing
(GRASP HERE)
Viewing
Mirrors
Patient
Window
Anterior Coil
Housing Anterior Coil Apron
(GRASP HERE)
Posterior
Coil Housing
Latch
Patient
Comfort
Pad