Sharpvision XV-Z9000U - Manual (Page 30)

E-30
Basic Operation
Adjusting the Picture
Adjusting the Color Temperature
This function can be used to adjust the color
temperature to suit the type of image input to the
projector (DVD, video, computer image, TV broadcast,
etc.).
This function can be operated using the CLR TEMP
buttons on the remote control, as well as the GUI menu
screen.
Adjusting the Color Temperature with the
Remote Control
1 Press CLR TEMP (–/+) on the remote control.
Then, the present color temperature level is
displayed.
2 Press CLR TEMP (–/+) to change the color
temperature level.
• The descriptions of each of the button operations are
shown on the table below.
• “ ” disappears after four-seconds of no-
operation.
Adjusting the Color Temperature using the
GUI Menu Screen
Description of Color Temperature
1 Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2 Press / to select “CLR Temp”.
3 Press / to move the mark of the color
temperature setting to the desired setting.
4 To exit the GUI, press MENU.
Increases color temperature for
cooler, bluish, florescent-like
images.
(High color temperature) Decreases color temperature for
warmer, reddish,
incandescent-like images.
(Low color temperature)
מ3 ם3
(Red) button button (Blue)
1,2
(GUI) On-screen Display
1,4
2,3
On-screen Display