Sony WEGA KLV-30MR1 - Manual (Page 46)

46
“Memory Stick”
Inserting and Removing a “Memory Stick”
Inserting a “Memory Stick”
Removing a “Memory Stick”
• Do not turn the power off whilst the “Memory Stick” access lamp is flashing in red.
If you do so, the “Memory Stick” may become damaged.
• When removing the “Memory Stick,” do not attempt to just pull it from the “Memory Stick” slot.
If you do so, the “Memory Stick” or the slot may become damaged.
• If, when removing the “Memory Stick”, you release it immediately after pushing it into the
“Memory Stick” slot, the “Memory Stick” may jump out.
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the b mark facing up as
illustrated. The “Memory Stick” access lamp flashes.
• Be sure to insert the “Memory Stick” correctly. If the “Memory Stick” is forced in the wrong way,
the “Memory Stick” or the slot may become damaged.
• Insert only “Memory Stick” into the “Memory Stick” slot. Attempting to insert other objects into
the slot may damage the TV.
1
Check that the “Memory Stick” access lamp is off, then push the “Memory Stick” gently into the
“Memory Stick” slot.
The “Memory Stick” is ejected.
2
Pull the “Memory Stick” completely out of the “Memory Stick” slot.
PROG
PROG
“Memory Stick” access lamp “Memory Stick”
b mark
PROG
PROG