Preparation of the remote control – Sony RD-XS35SC User Manual

Page 18

Advertising
background image

18

Operating with the remote control

Point the remote control at the remote sensor and
press the buttons.

Distance : About 7 m (23 ft) from the front of the

remote sensor

Angle

: About 30

° in each direction of the front of

the remote sensor

* Do not expose the remote sensor of the recorder to a

strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to
operate the recorder via the remote control.

Notes
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or

humid place.

• Do not spill water or put anything wet on the remote control.
• Do not disassemble the remote control.

30

°

30

°

Introduction

Preparation of the remote control

1

Open the cover.

2

Insert batteries (AAA size).

Make sure to match the + and – on the
batteries to the marks inside the battery
compartment.

3

Close the cover.

Caution
• Never throw batteries into a fire.

Notes
• Be sure to use AAA size batteries.
• Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.

• If the remote control does not operate correctly, or if the

operating range becomes reduced, replace batteries with
new ones.

• When necessary to replace batteries in the remote control,

always replace both batteries with new ones. Never mix
battery types or use new and used batteries in
combination.

• Always remove batteries from the remote control if they are

dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.

Within about 7 m (23 ft)

RD-XS35SU/SC_Inst_E_p02-18

06.2.13, 4:33 PM

18

Advertising
This manual is related to the following products: