Sony RD-XS35SC - Manual (Page 41)

41
Introduction
Connections
Basic setup
4
Press ADJUST (or / ) to set “DBS” to “Not
used” or “Use”.
Not used:
When a satellite set top box is not connected to the
INPUT3 jacks of the recorder.
Skip to step 8.
Use:
When a satellite set top box is connected to the INPUT3
jacks of the recorder.
5
Press , then press ADJUST (or / ) to set
“IR control” to “On” or “Off”.
Off: Channels of the satellite set top box are selected
by its own selector.
Skip to step 8.
On: The recorder can change channels of the satellite
set top box.
Be sure to make the G-LINK™ connection
(
page 25).
6
Press , then press the number buttons to
enter the 3 digits of a brand code of your
satellite set top box obtained from the list
(
page 43).
e.g. If you connect a TOSHIBA satellite set top box:
7
Press , then press ADJUST (or / ) to set
“ENTER code” to “On” or “Off”.
Confirm whether the connected satellite set top box
requires ENTER input after digits in channel selection or
not.
On: If ENTER input is required.
Off: If ENTER input is not required.
(Continued)
0 0 9
FR
AM
E/A
DJU
ST
FR
AM
E/A
DJU
ST
ENTER
ENTER
1 2 3
4 5 6
7 8 9
0
FR
AM
E/A
DJU
ST
ENTER
RD-XS35SU/SC_Inst_E_p29-43 06.2.13, 4:33 PM 41