Sima Products Sima SUR-35 - Manual (Page 22)

SUR-35 User Manual
Ch.
SUR-35 User Manual
Ch.
Page
22
Programming Infrared Codes Programming Infrared Codes Programming Infrared Codes Programming Infrared Codes Programming Infrared Codes
There are two methods you can use to program infrared
codes into the SUR-35:
• Using Manufacturer Codes: Use this method to
automatically configure all buttons on the SUR-35 for use
with a specific manufacturer’s model number. This feature is
the fastest way to program the SUR-35 but requires that
your device be located in the Manufacturer Code Tables .
(Some newer or less common devices may not be pre-
programmed and must be learned using the Learning
Function.)
• Using the Learning Function: Use this method to directly
learn the proper infrared signals from another remote
control. The learning eye of the SUR-35 will learn the proper
signals to send. This method is perfect for newer or less
common devices or if a certain button still not does perform
the desired function after using pre-programmed
manufacturer codes. However, in rare cases, the SUR-35
may not be able to copy the codes from another remote and
it may be necessary to collect unrecognized codes and
send them to Sima. (See Collecting Unrecognized Infrared
Codes in Chapter 3.)
P PP PProgramming rogramming rogramming rogramming rogramming
33333
Page
39
4. Select a device using the
device buttons on the SUR-35.
For this example press the TV
button.
33333
Macros Macros Macros Macros Macros
5. On the Touch Screen select
one of the buttons to assign the
macro to.
You will hear three beeps.
Note: If you select a key that
already has a macro assigned to it
you will replace the old macro.
Note: You cannot assign a macro to
the Quick Channel buttons.
Define Macro
6. Press the TV device button.
7. Press the POWER button.
55555
& & & & &
4
%
7
& & & & &
6