Sony VGN-FS600 Series - Manual (Page 102)

102
n N
Using Peripheral Devices
VGN-FS600 Series models
1 If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.
2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer.
✍
VGN-A700 Series models are equipped with the DVI-D port.
DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has 24
pins.
A DVI-I connector (Digital Visual Interface - Integrated) supports digital video and analog video signals. It has 29 pins.
!
You can not connect a DVI-I to VGA cable to a DVI-D port!