Sony VGN-FS600 Series - Manual (Page 83)

83
n N
Using Peripheral Devices
To connect in terrestrial mode (Option 2)
1 Connect one end of the antenna's 300-ohm twin lead cable (1) to the screw-type grips at your antenna outlet (2). Connect the
other end to the grips on the VHF/UHF RF combiner/transformer (3).
2 Connect the coaxial cable feed connector (4) (optional) to the VHF/UHF RF combiner/transformer (3).
3 Connect the TV coaxial cable (5) (supplied) from the feed connector (4) to the VHF/UHF port (6) on the port replicator.