Sony VGN-FS600 Series - Manual (Page 104)

104
n N
Using Peripheral Devices
Connecting a TV
You can connect a TV to VGN-A700 Series models or to the port replicator.
To connect a TV to the computer
1 Plug the power cord of the TV (1) into an AC outlet.
2 Plug one end of an audio/video cable (2) into the AV Out jack (3) T on the computer and the other to the TV.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.
✍
You need to use an AV cable that has a minijack connector on one end and 3 RCA (also called cinch) connectors on the other end. If your TV does not have
RCA connectors, but it has a Scart connector, you need an RCA to Scart converter. If your computer has an S-video port, you can use this port as an
alternative means of connection.