Sony STR-DG300 - Manual (Page 19)

19 GB
C:\Documents and
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB03CON_STR-
DG300-CEL.fm masterpage: Right
STR-DG300
2-662-257-11 (1)
Gettin
g
Sta
rted
5: Preparing the receiver
and the remote
Connect the AC power cord to a wall outlet.
Notes
• Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver’s AC
OUTLET does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric iron, fan, or TV to
this outlet. This may cause a malfunction.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings for the speaker system and
sound adjustment.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
Connecting the AC power cord
FRONT A FRONT B
+ – + –
R
L
R
L
SPEAKERS
SWITCHED 100W/0.4A MAX
AC OUTLET
AC power cord
To the wall outlet
AC OUTLET
Performing initial setup
operations
?/1
VIDEO 3 IN/ PORTABLE AUDIO IN
SPEAKERS (OFF/A/B/A+B)
PHONES
TREBLE BASS A.F.D. MOVIE MUSIC DIRECT
TUNING MODE DISPLAY INPUT MODE
INPUT SELECTOR TUNING – +
WOOFER ON/OFF MUTING
MASTER VOLUME
1,2
GB01COV_STR-DG300-CEL.book Page 19 Monday, May 22, 2006 7:39 AM