Sony STR-DG300 - Manual (Page 39)

39 GB
C:\Documents and
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB07OTH_STR-DG300-
CEL.fm masterpage: Right
STR-DG300
2-662-257-11 (1)
O
the
r Op
er
atio
ns
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When Sleep Timer is being used, “SLEEP”
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Recording audio using
the receiver
You can record audio from a VCR, TV,
cassette deck or MD deck using the receiver.
For details, refer to the operating instructions
supplied with your recording component.
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
3
Prepare the recording
component.
For example, insert a blank MD, etc. into
the recording deck and adjust the
recording level.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
GB01COV_STR-DG300-CEL.book Page 39 Monday, May 22, 2006 7:39 AM