Sony STR-DG300 - Manual (Page 33)

33 GB
C:\Documents and
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB06SEL_STR-DG300-
CEL.fm masterpage: Right
STR-DG300
2-662-257-11 (1)
T
uner O
p
e
ratio
ns
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“AUTO T.”.
3 Turn TUNING +/–.
In case of poor FM stereo
reception
If the FM stereo reception is poor and
“STEREO” flashes on the display, select
monaural audio so that the sound will be less
distorted.
Press FM MODE repeatedly until the
“MONO” indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the “MONO” indicator on the
display do not light up.
You can enter the frequency of a station
directly by using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
4
Press ENTER.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Direct tuning
1 2 3
4 6
7 8
0/10 ENTER
9
VIDEO 1 VIDEO 2
MD/TAPE SA-CD/CD
VIDEO 3 DVD
A.F.D. MOVIE MUSIC LEVEL
SUB WOOFER
MEMORY DVD MENU
CLEAR
FM MODE
D.TUNING
D.SKIP
TUNER AMP MENU
>10/
-
5
1
2
4
3
GB01COV_STR-DG300-CEL.book Page 33 Monday, May 22, 2006 7:39 AM