Sharp PG-D40W3D - Manual (Page 38)

34
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can use the
remote control as the computer mouse.
If the computer is placed too far away from the projector to be connected via the USB
cable, the remote receiver (optional, AN-MR2) makes it possible to operate the
projector with the remote control. For details, see the operation manual of the
receiver.
Connecting with a USB cable
or
Remote receiver
(optional, AN-MR2)
To USB terminal
USB cable
(commercially available or available as
Sharp service part QCNWGA014WJPZ)
To USB terminal
Computer
The mouse pointer can be
operated in the following way
after it is connected.
When moving the cursor
Press MOUSE/Adjustment buttons (P/R/O/Q).
When left-clicking
Press L-CLICK.
When right-clicking
Press R-CLICK.
When your computer supports only a
one-click mouse (such as Macintosh)
Press L-CLICK or R-CLICK.
L-CLICK and R-CLICK have common function.
When using [Page Up] or [Page Down]
■
■
■
■
■
MOUSE/Adjustment
buttons (
'/"/\/|)
R-CLICK button
L-CLICK button
PAGE UP/
PAGE DOWN buttons
MOUSE/Adjustment
buttons (
'/"/\/|)
R-CLICK button
L-CLICK button
PAGE UP/
PAGE DOWN buttons
Same as the [Page Up] and [Page Down] keys on a computer keyboard.
Press PAGE UP or PAGE DOWN.
This function only works with the Microsoft ® Windows ® OS and Mac OS ® . However, this function
does not work with the following operation systems that do not support USB.
Versions earlier than Windows ® 95
Versions earlier than Windows ® NT4.0
Versions earlier than Mac OS ® 8.5
You cannot use this function when displaying the menu screen.
Confi rm that the computer recognizes the USB connection.
•
•
•
•
•
•
Note
Operating with the Remote Control (Continued)