Picture adjustment (“picture” menu), Selecting the picture mode, 1 selecting the picture mode – Sharp PG-D40W3D User Manual
Page 44: Info, Menu operation n page 38 q page1 q page2
40
Picture Adjustment (“Picture” Menu)
Q PAGE1
Q PAGE2
Picture Mode
Contrast
0
0
0
0
Bright
Color
Tint
0
Sharp
Standard
SEL./ADJ.
ENTER
END
0
0
Red
Blue
Picture
SCR
PRJ
Net.
Help
1
2
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S.
Standard
SEL./ADJ.
ENTER
END
Progressive
Eco+Quiet
0
1
On
3D Progressive
On
DNR
Off
Reset
Picture
SCR
PRJ
Net.
Help
7
6
5
4
2
3
1 Selecting the Picture Mode
Selectable
items
Description
The default settings of each item when selecting Picture Mode
CLR Temp
BrilliantColor
TM
Eco+Quiet
Standard
For standard image
0
1
Off
Presentation Brightens portions of image for
more enhanced presentations.
0
2
Off
Movie
Gives natural tint to the
projected image.
–1
0
On
Game
Gives sharpness to the
projected image.
0
1
Off
*sRGB
For high fi delity reproduction of
images from a computer.
–
–
Off
“sRGB” is displayed only when RGB signal is input.
You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
retained in memory.
You can also press PICTURE MODE on the remote control to select the picture mode. (See page
*sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fi xed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColor
TM
”, when “sRGB” is selected.
•
•
Note
Info
When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.
•
•
•