Swann 16-8500AI SW243-X6G - Manual (Page 11)

REMOTE CONTROLLER
FRONT PANEL
MOUSE Press the DISPLAY button
Press the DISPLAY button
Right-click and select Change Disp. on context menu
In the sequence mode, each channel is displayed on the screen for the preset
period of time.
How to display each channel & multichannel (DISPLAY)
NOTICE
NOTICE
Whenever you press the DISPLAY button or click the ., it will change screen
mode in a cycle. starting from the current screen mode.
Click the button in 1, 4, 9 channel screen mode to change channel group within
the group.
How to rotate monitoring channels (SEQUENCE)
To change display mode:
To enable/disable sequence mode:
It takes about 20 seconds to initialize the DVR after input power.
Once the DVR completes the initializing process, it will display the live video on
the connected VGA monitor.
Press the camera channel number ~ buttons on the remote controller
or channel number ~ buttons on the front panel.
Press the
SEQUENCE button
Press the
SEQUENCE button
Right-click and select
Sequence in context menu in Live mode
REMOTE CONTROLLER
FRONT PANEL
MOUSE
NOTICE
When sequence mode is ‘On’, icon will be appeared on OSD.
OPERA
TION