Sennheiser W300 IEM - Manual (Page 11)

9
Indications and displays on the transmitter
Modulation display
The level display for audio signal “AF” shows the modulation of the
transmitter.
When the transmitter’s audio input level is excessively high, the level display
for audio signal “AF” shows full deflection.
When the transmitter is overmodulated frequently or for an extended period
of time, the text “PEAK” (backlit in red) flashes in alternation with the
standard display.
Button backlighting
During standby operation, the ON button
¶
is backlit in red. When the
transmitter is switched on, the SET button
²
and the
̆
/
̄
button
ᕤ
are
additionally backlit in green.
Indications and displays on the receiver
Operation and battery status indication
The red LED (LOW BAT/ON)
»
provides information on the current operating
state of the receiver:
In addition, the 4-step battery status display ብ on the display panel provides
information on the remaining battery/BA 2015 accupack capacity:
Modulation display of the received transmitter
The level display for audio signal “AF” shows the modulation of the received
transmitter.
When the transmitter’s audio input level is excessively high (AF peak), the
receiver’s level display for audio signal “AF” shows full deflection.
´ ² ¶
ብ
»
Red LED lit up: The receiver is switched on and the capacity of the
batteries/BA 2015 accupack is sufficient.
Red LED flashing: The batteries are/the BA 2015 accupack is going flat
(LOW BAT)!
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing: LOW BAT
ew300_350_IEM_INT.book Seite 9 Freitag, 7. März 2008 8:55 08