Sennheiser W300 IEM - Manual (Page 14)

12
Rack mounting the SR 350 IEM G2
twin transmitter
The rack mount “ears” are already fitted to the twin transmitter on delivery.
To mount the twin transmitter into a 19’’ rack:
̈
Slide the twin receiver into the 19’’ rack.
̈ Secure the rack mount “ears” to the rack using four screws (not included).
Rack mounting the SR 300 IEM G2
transmitter
For mounting one or two transmitters into a 19” rack, you require the GA 2
rack adapter. The GA 2 rack adapter consists of:
y 2 rack mount “ears” Ƽ
y 1 blanking plate ƽ
y 1 jointing plate ƾ
y 2 blanking plugs ƿ for closing off unused BNC holes
y 12 recessed head screws M 3x6
y 2 recessed head screws M 6x10
To mount two transmitters side by side into a rack:
̈
Place the two transmitters side by side upside-down onto a flat surface.
̈ Align the jointing plate ƾ over the holes in the bottom sides of the
transmitters.
̈ Secure the jointing plate ƾ to the transmitters using eight of the supplied
recessed head screws (M 3x6).
̈
Hook the two rack mount “ears”
ƽ
to the front panels of the transmitters.
̈ Secure the rack mount “ears” to the transmitters using two of the
supplied recessed head screws (M 3x6) respectively.
̈ Slide the transmitters into the 19” rack.
̈
Secure the rack mount “ears” to the rack.
ƽ ƾ
ƿ
Ƽ
Ƽ
Ƽ
ƾ
ew300_350_IEM_INT.book Seite 12 Freitag, 7. März 2008 8:55 08