Specifying the speaker parameters – Sony HT-SL5 User Manual

Page 13

Advertising
background image

13

GB

Hooking Up and Setting Up the Speaker System

Specifying the speaker
parameters

1

Press MAIN MENU repeatedly to select
the SET UP menu.

2

Move the

V/v/B/b

button up or down

to select the parameter you want to
adjust.

3

Move the

V/v/B/b

button to left or

right to select the setting you want.

4

Repeat steps 2 to 3 until you have set
all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

DIST. XX.X m

5.0 m

C

DIST. XX.X m

5.0 m

SL

SR

DIST. XX.X m

5.0 m

SL

SR

PL. XXX

BEHD.

SL

SR

HGT. XXX

LOW

x

Front speaker distance
(

L

R

DIST. XX.X m)

Set the distance from your listening position to
the front speakers (A on page 12).

x

Center speaker distance
(

C

DIST. XX.X m)

Set the distance from your listening position to
the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (A on page 12) to a distance
1.5 meters closer to your listening position (B
on page 12).

x

Surround speaker distance
(

SL

SR

DIST. XX.X m)

Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (A on page 12) to a
distance 4.5 meters closer to your listening
position (C on page 12).

Tip

The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
1.5 meters closer than the front speakers.
Likewise, the surround speakers can not be set farther
away from the listening position than the front
speakers. And they can be no more than 4.5 meters
closer.
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
For example, setting the center speaker distance
1–2 m closer than the actual speaker position will
create a fairly realistic sensation of being “inside” the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!

continued

Advertising