Understanding the multi channel surround displays – Sony HT-SL5 User Manual
Page 20
20
GB
1 ;
DIGITAL:
Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
2 ;
PRO LOGIC II:
“PRO LOGIC” lights up
when a 2-channel signal is applied with
“DOLBY PL” or C.ST.EX A–C. “PRO
LOGIC II” lights up when a 2-channel signal
is set to “II MOVIE” or “II MUSIC”.
However, this indicator does not light if the
center and surround speakers are set to “NO”,
and “AUTO DEC” or “NORM. SURR.” is
selected.
3
DTS:
Lights up when DTS signals are input.
4
MPEG:
Lights up when MPEG signals are
input.
Note
Only the front 2 channels are compatible with
MPEG format. Multi channel surround sound is
downmixed and output from the front 2 channels.
5
Tuner indicators:
Light up when using the
receiver to tune in radio stations, etc. See
pages 23–24 for tuner operations.
6
SLEEP:
Lights up when sleep timer is
activated.
7
D.RANGE:
Lights up when dynamic range
compression is activated. See page 22 to
adjust the dynamic range compression.
8
COAX:
Lights up when the source signal is a
digital signal being input through the COAX
terminal.
9
OPT:
Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
0
LFE:
Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.
qa
Playback channel indicators:
The letters
light up to indicate the channels being played
back.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (Sub woofer)
The boxes around the letters light up to
indicate the speakers used to playback the
channels.
Understanding the multi channel surround displays
D.RANGE
STEREO MONO
SLEEP
MEMORY
DTS
MPEG
OPT
SL
SW
S SR
L
C
R
L F E
DIGITAL
a
PRO LOGIC II
a
COAX
0
1
2
3
4
5
7
8
6
9
qa