Sony HT-SL5 - Manual (Page 17)

17 GB
Hooking Up and Setting Up the Speaker System
Basic Operations
Selecting the component
Function buttons
Press a function button to select the component
you want to use.
To select Press
VCR VIDEO
DVD player DVD
TV or digital TV/SAT
satellite tuner (etc.)
Tuner TUNER
After turning on the component you selected,
select the component and play the program
source.
MUTING
Press MUTING to mute the sound. MUTING
appears on the display when the sound is
muted. To cancel muting, press it again or turn
up the volume.
The muting function is also canceled when
turning the power off, or disconnecting the
power cord.
Checking the connections
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1
Press ?/1 to turn on the receiver.
2
Press a function button to select a
component (program source) that you
connected (e.g., DVD player).
3
Turn on the component and start
playing it.
4
Rotate MASTER VOLUME to turn up the
volume.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 27 and take the
appropriate measures to correct the problem.
Switching the setting of fan control
Hold down PLII button and press ?/1 to change the
fan control setup. Each time you do the procedure
above, the following setup appears.
Select To
FAN ON* Turn on the fan at all times.
FAN AUTO Turn on the fan automatically
when there is sufficient speaker
output.
* Initial setting.
Basic Operations