Sony WALKMAN MZ-NH1 - Manual (Page 110)

110
4
If necessary, change the transfer mode.
As the default setting, tracks in the OpenMG (PCM/ATRAC3/ATRAC3plus) format
will be transferred in the same format and bit rate (normal transfer).
If the device connected to the computer does not support the above format, the format
and bit rate will be converted to those of the device. In some case, this process may
take time.
If you want to change the format and bit rate, click [Transfer Mode] in the center of the
screen to display “Transfer Mode Settings” dialog box.
5
Click .
Transfer of the tracks selected in step 3 begins.
To stop transferring
Click .
When transferring to a Hi-MD Walkman
If you want to play the transferred tracks on a Net MD Walkman that does not support Hi-
MD, select [Net MD] for the mode (operation mode) on the right side of the screen after
step 2. This operation mode can be selected only when using a standard disc in Hi-MD
mode for recording.
• A transfer will fail and an error message will appear in the following cases:
—When there is no enough free space on the disc.
—When the track is subject to playback restrictions.
• During the transfer, the system suspend, sleep, or hibernation function will not operate.
• Depending on the type of the text and number of characters, the text entered by SonicStage may not be
displayed on the connected MD Walkman. This is due to the limitations of the connected MD
Walkman.
Notes