Samsung BN68-01736B-00 - Manual (Page 14)

Analogue
4. Press the ENTER button to select “Start”.
If you want to stop Auto Store, press the ENTER button.
The “Stop Auto Store?” message will be displayed.
Select “Yes” by pressing the ◄or ►button, then press the ENTER
button.
Digital & Analogue / Digital
4. The update procedures differ depending on the selected “Country”.
Update the channel list by selecting an appropriate option.
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select “Auto”, “Cable” or “Aerial”. Press the
ENTER button.
Press the ENTER button to select “Start”.
- Cable: Scans cable channels.
- Aerial: Scans aerial channels.
This product cannot scan both cable and aerial channels at the same
time.
When it has finished, the number of scanned services will be displayed.
The existing favourite channel list will not be deleted when the channel list
is updated.
When the “Country” was set to “Sweden”, or “Denmark”
Press the ▲ or ▼ button to select “Cable” or “Aerial”. Press the ENTER
button.
When selecting “Cable”:
- Frequency: Displays the frequency for the channel. (Differs in each
country)
- Modulation: Displays available modulation values.
- Symbol Rate: Displays available symbol rates.
- Network ID: Displays the network identification code.
Press the red button to start the scan for digital services. When it has
finished, channels are updated in the channel list.
When selecting “Aerial”:
Press the ENTER button to select “Start”.
When the “Country” was set to “Norway”
Press the ENTER button to select “Start”.
➣

➣
➣
➣


English - 
Auto Store
143000kHz
Frequency
QAM 64
Modulation
6875 kS/s
Symbol Rate
999
Network ID
Enter Adjust Move Skip
Auto Store
Auto Store in progress.
Digital Channels: 29 154MHz
Analogue Channels: 0
Stop
20%
Enter Return
Auto Store
Select the Antenna source to memorize.
Cable
Air Start
Enter Move
Start
Return
Auto Store
Auto Store in progress. S3
172MHz
Analogue Channels: 0
Stop
20%
Enter Return
BN68-01736B-00Eng.indb 12 2008-09-01 �� 6:15:39