Samsung BN68-01736B-00 - Manual (Page 31)

English - 
Configuring Picture Options
Activating Picture Options
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select “Picture Options”, then press the
ENTER button.
Press the ▲ or ▼ button to select a particular item. Press the
ENTER
button.
When you are satisfied with your setting, press the
ENTER button.
In PC mode, you can only make changes to the “Colour Tone” and “Size”
from among the items in “Picture Options”.
Colour Tone: Cool/Cool/Normal/Warm/Warm
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected “Picture” mode.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size: Auto Wide/:/Wide Zoom/Zoom/:/just Scan
You can select the picture size which best corresponds to your viewing
requirements.
Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio.
:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
:: This is the default setting for a video movie or normal broadcasting.
just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component
(1080i/1080p) signals are input.
•
•
•
•
•
•
“Auto Wide” function is available only in “TV”, “Ext.1”, “Ext.2”, “AV”, and “S-Video” mode.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
“Wide Zoom”: Press the ► button to Select “Position”, then press the
ENTER button. Press the ▲ or ▼ button
to move the screen up/down. Then press the ENTER button.
“Zoom”: Press the ► button to Select “Position”, then press the ENTER button. Press the ▲ or ▼ button to
move the picture up and down. Then press the ENTER button. Press the ► button to Select “Size”, then press
the ENTER button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then
press the ENTER button.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
After selecting “just Scan” in HDMI (00i/00p) or Component (00i/00p) mode:
Select “Position” by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
You can select these options by simply pressing the P.SIZE button on the
remote control.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Picture Size”.
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
➣
➣
➣

➣
➣

➣
➣
➣
➣
➣
➣
➣
➣
➣
O
Tools
Anynet+ (HDMI-CEC)
Picture Size ◄ Auto Wide ►
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll : Mono
Move Adjust e Exit
Tint (G/R) : G50/R50
Detailed Settings
Picture Options ►
Picture Reset
Picture
Picture Options
Colour Tone : Normal ►
Size : Auto Wide
Screen Mode : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Medium
100Hz Motion Plus : Medium
▼
Return Enter Move
BN68-01736B-00Eng.indb 29 2008-09-01 �� 6:15:45