Siemens HiPath 4000 - Manual (Page 37)

Setting the handset
29
Step by Step
D E [
Select the menu item and confirm.
[
Activate (or deactivate) night mode.
Night mode is activated.
The night mode function is active when a checkmark
appears beside the corresponding menu item and can
be deactivated by selecting the menu item once more.
Changing the name of the base station
You can change the base station name that is displayed
in idle status. The handset must be registered at the
corresponding base.
©
or
G
Open the main menu of the handset.
D E [
Select the menu item and confirm.
D E [
Select the menu item and confirm.
D E [
Select the menu item and confirm.
D E [
Select the menu item and confirm.
The selected base is activated. The activated base is
ticked. It can be deactivated by selecting another base.
Change the settings.
Edit Name: X Delete text.
o
and possibly X Enter the required text and correct individual characters
as necessary using the "Delete" display key.
Save the settings.
a Press the On-hook key to end the process.
aa Press the On-hook key twice to turn the handset off and
back on.
The new base station name is now displayed in idle sta-
tus. This name is replaced by the user’s name or the
phone number dialled when you call a user. The name
of the base station only reappears after the handset has
been switched off and back on again.
Night Mode
H/Set Settings
Handset
Select Base
<Base>
Change
Save