Siemens HiPath 4000 - Manual (Page 88)

Step by Step
Additional functions
80
Selecting a base
If your handset is registered at multiple bases, then you
can set a specific base or the base with the best recep-
tion as the base to be used. The handset then switches
automatically to this base.
You can change the base name that is displayed on the
handset at any time (Æ page 29).
©
or
G
Open the main menu of the handset.
F G [
Select the menu item and confirm.
D E [
Select the menu item and confirm.
D E [
Select the menu item and confirm.
D E [
Select the required base and confirm. The selected
base is ticked. If you select "Best Base", the handset
searches for the base that has the best reception.
a Press the On-hook key to end the process.
Speed access to functions and phone
numbers
You can program the left display key and the number
keys 0 and 2 to 9 with a phone number or function. You
can then dial the phone number or start the function
programmed by simply pressing the appropriate key.
Configuring speed access
either:
0 / 2 ... 9 Press the required number key briefly.
If this key is already programmed with a function, it
appears on the left display key. The number key can be
programmed with a new function.
Press the display key.
or:
0 / 2 ... 9 / Press and hold down the required number key or the
left display key.
H/Set Set-
tings
Handset
Select Base
Base 1
Best Base
Set
?