Siemens HiPath 4000 - Manual (Page 62)

Step by Step
Conducting calls – enhanced functions
54
Deactivating variable forwarding
You can deactivate all variable forwarding types in the
Service Menu (Basic Service).
F
Call the system menu.
> < [
Select and confirm the basic service.
> < [
Select the menu item and confirm.
[
Confirm. The display shows "variable forwarding".
[
Confirm. The display shows "FWD-FIXED off".
[
Confirm. The display shows "Forwarding for internal".
> < [
Select and confirm. Variable forwarding is deactivated
and the forwarding destination is deleted.
To select a different variable forwarding type, proceed
as described on Æ page 52.
Checking forwarding
To check up on the status of the forwarding types, pro-
ceed as described on Æ page 52. The forwarding desti-
nation is shown in the second line if this variable for-
warding type is activated.
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
Deactivate