Samsung SID-560 - Manual (Page 14)

COLOR CCD CAMERA User’s Manual 27 COLOR CCD CAMERA User’s Manual 26
Operating Your Camera
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up
and Down buttons so that the arrow indicates BACKLIGHT .
2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
BACKLIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
8.SPECIAL
9.EXIT
3. Select a desired mode using the Left and Right buttons and press the SET button.
Select WDR to adjust the WDR LIMIT and LEVEL.
- LIMIT : Adjust the WDR Sensitivity by selecting LOW, MIDDLE, or HIGH.
- LEVEL : Adjust the WDR Brightness by controlling the bar from 0 to 100.
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
WDR : When there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
OFF : Deactivates the WDR function.
WDR OFF
Select ‘BLC’ to adjust the area to be enhanced and enhancement level.
• You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’
menu is selected.
• Since the following symptoms may occur according to the ambient illumination
when WDR is selected, set it to OFF.
Color or screen changes unnaturally.
Noise appears in the bright part of the screen.
• Since the performance of the WDR function may be affected by the area of the
bright part of the screen, optimize the installation angle for the best WDR
performance.
• If you increase LIMIT, the screen display may be distorted.
Notes