Samsung SID-560 - Manual (Page 7)

Overview
COLOR CCD CAMERA User’s Manual 13 COLOR CCD CAMERA User’s Manual 12
Pan Base
control panning angle of camera
Rotate Base
control rotating angle of camera
X2.5 Vari-focal Lens Module
Rotate Base Holding Screw
fix rotated position
Pan Base Holding Screws (Color : Silver)
fix panned position
RS-485 Control Cable : The detailed description refers to p18
Power Input Jack
Video Output Jack
Function Setup Button
SET Button : Displays the menu on the screen. Press this button to confirm
status or after changing a selected item.
Left and Right Button : Used to move the cursor left or right in the menu
screen or to change the value of the selected item.
Up and Down Button : Used to move the cursor up or down in the menu
screen to select a desired menu item.
Video Output Terminal to Monitor
Dome Cover
Shield Case
Installation
Installation
1) Separate the dome cover by clockwise rotation.
2) Separate the shield case by pulling from the camera body.
• The installation should be done by qualified service personnel or sysytem
installers.
• If the ceiling material is not strong enough to hold the installation screws, the
camera may fall off. Reinforce the ceiling as needed.
Notes
* To install the dome cover on the camera
body, turn the latches in locking
direction as shown in the figure 1.
Locking direction
(Clockwise)
Latch
Locking direction
[Figure-1]
Main Body
(Camera)
Shield Case
Dome cover
Unlocking direction
(Counterclockwise)