Sony 4-130-031-11(3) - Manual (Page 53)

53 GB
Ot
her
Oper
at
ions
To insert the wireless
transmitter into the S-AIR main
unit
1
Remove the screws and detach the slot
cover.
Notes
• Remove the screws from the slot cover bearing
the caution mark. Do not remove other screws.
• The slot cover is no longer necessary. However,
keep it after detaching.
2 Insert the wireless transmitter.
Notes
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
• Do not insert other than the wireless
transmitter into the EZW-T100 slot.
3 Use the screws that you removed from
step 1 to fasten the wireless
transmitter.
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless
transceiver into the surround amplifier and
S-AIR receiver, refer to the operating
instructions supplied with the surround
amplifier and S-AIR receiver.
AUTO
CAL MIC
DMPORT
DC5V 700mA MAX
AUDIO IN
VIDEO 1
L
R
EZW-T100
EZW
-T10
0
Slot cover
EZW
-T10
0
Wireless transmitter
EZW-T100 slot
EZW
-T100